King County, Washington
Boat Refloating in Redmond
Grounded or swamped, back on the water without a wrecker.
Boat Refloating in Redmond, WA: grounded or swamped, back on the water without a wrecker. We cover King County and the surrounding area with the right rig for the job and a free on-site estimate.
Around Redmond, boats end up in driveways, marina slips, and dry storage, and we have pulled them from all three.
- Licensed & insured
- Free on-site estimate
- Same-week scheduling
- Donate & recycle first
- Boats, RVs & oversized loads
- 20 states covered
Redmond, WA
Boat Refloating in Redmond, done the Redmond way
Redmond has every kind of job in it, from residential streets to commercial lots, and the process is the same for each: look, quote on site, wait for your yes, then work.
Marinas around Redmond have their own rules for removals. We coordinate with the dockmaster, bring marine-rated straps and the right trailer, and handle the the Washington Department of Licensing, with derelict vessels handled by the Department of Natural Resources paperwork.
Wet winters rot boats and campers fast, and spring is when Puget Sound marinas and storage lots push owners to deal with them. The calendar fills up in those stretches, so booking a week ahead gets you the window you want.
What we handle
Boat Refloating in Redmond: what we take
The short version: if it fits the description below, we take it. The long version is on the phone with whoever answers.
- 01
Grounded boats after storms or low tide
Boats pushed onto sandbars, shorelines, and seawalls by storms or low water.
- 02
Swamped hulls at the dock
Rain-filled or leaking hulls that are sitting low but not on the bottom.
- 03
Listing boats with water intrusion
Boats taking on water that need pumping and a tow before they go under.
- 04
Tow to ramp, lift, or repair yard
Delivery to wherever it needs to go next.
- 05
Post-storm recovery for marinas
Multiple-vessel refloating for marinas after a storm.
How it works
How boat refloating works in Redmond
Here is how a boat refloating job in Redmond runs from the first call to the last sweep.
- 01
Assess
Location, water depth, hull condition, and tide. We decide between pumps, lift bags, or a straight pull.
- 02
Stabilize
Lines set, water pumped, hull patched or bagged where needed.
- 03
Refloat
Controlled, on the right tide, without dragging the hull over the bottom.
- 04
Deliver
Towed to the ramp, the lift, or the yard, or removed entirely if that is the plan.
Washington rules
Titles, disposal, and Washington rules for boat refloating
Boat titling and registration in Washington is handled by the Washington Department of Licensing, with derelict vessels handled by the Department of Natural Resources. If you have the title, the removal is straightforward. If you do not, most counties recognize a release or abandoned-vessel process and we prepare the paperwork with you. Common waters in Washington include Puget Sound, Lake Washington and the Columbia River.
Fuel, oil, batteries, and refrigerant are handled properly on every job, which is the difference between a licensed removal company and an unlicensed one. Ask about it and we will show you where it goes.
Wet winters rot boats and campers fast, and spring is when Puget Sound marinas and storage lots push owners to deal with them.
Why now
Why Redmond stops putting it off
Most boat refloating calls from Redmond come after months of "we'll deal with it." Here is why the people who called last week were glad they did.
- A boat taking on water today is a sunken boat recovery tomorrow.
- Grounded hulls grind against the bottom with every wave.
- Insurance claims go smoother when the boat is recovered quickly and documented.
- Wet winters rot boats and campers fast, and spring is when Puget Sound marinas and storage lots push owners to deal with them.
From the truck
What boat refloating looks like on the day.
- Stabilized and floating
Lifted for transport
Swamped at the dock
Straight talk
What boat refloating does not include
Two things every boat refloating customer should know before booking anyone, including us:
- We refloat and move boats. We do not repair them.
- Some hulls are too far gone to save, and we will tell you that on site rather than charge you for a refloat that does not hold.
Sound familiar?
Common boat refloating situations in Redmond
Every boat refloating call from Redmond starts with a story, and most of them sound like one of these.
- 01
Aground after the storm
The surge put the boat on the seawall or the neighbor's lawn, and it needs to go back in the water without cracking the hull.
- 02
Sitting low at the dock
Rain-filled and listing, but not under yet. A pump-out and a tow to the lift solves it today.
- 03
Low water stranding
The lake dropped and the boat is on the bottom at the dock. It needs to be floated and moved to deeper water.
- 04
Post-storm marina cleanup
Several boats pushed onto the shore and stacked against each other, each needing a controlled refloat.
Afterward
Where boat refloating material from Redmond ends up
"Where does it go?" is the right question to ask any removal company. This is our answer for Redmond.
- 01
Fuel, oil, and batteries
Fluids are drained and batteries removed before the hull moves, and both go to certified facilities.
- 02
Motors and hardware
Outboards, stern drives, winches, and stainless hardware are recovered for salvage or scrap.
- 03
Hull breakdown
Fiberglass hulls are cut down and disposed of at a facility that accepts them. Aluminum hulls are recycled as scrap.
- 04
Trailers
Working trailers are reused or resold; rusted-out frames go to scrap.
Before we arrive
How to prepare for boat refloating in Redmond
A few minutes before the crew arrives in Redmond saves an hour on site. None of it is heavy lifting.
- Note the tide or water level trend so we can time the job.
- Do not run the engine or try to pull it with a vehicle; hulls crack that way.
- Tell us where it should go afterward: ramp, lift, or repair yard.
Equipment
What boat refloating in Redmond takes
The reason this job gets turned down by other companies is usually equipment. This is what we bring to Redmond.
- 01
Marine-rated straps
Hulls are strapped, not chained, and supported where the hull is meant to be supported.
- 02
Trailers rated for the load
Bunk, roller, and keel-capable trailers for boats of different hull types and sizes.
- 03
Winches, pumps, and lift bags
For boats with no trailer, boats in the water, and boats that are half under it.
Nearby
Boat refloating near Redmond
We also handle boat refloating in Seattle, Bellevue, Kent, Renton and Federal Way and the rest of King County. Same process.
Questions from Redmond
Boat Refloating in Redmond: your questions
Is refloating cheaper than removal?
Usually, when the hull is sound. We assess on site and tell you honestly which makes sense.
Do you repair boats?
No. We get it floating and moved. Your yard handles repairs.
Do you offer same-day boat refloating in Redmond?
Same-day boat refloating in Redmond depends on that day's schedule. We keep windows open for urgent calls, and next-day is almost always available.
Are you licensed and insured for boat refloating in Washington?
Yes. Lucky Hauling carries general liability and auto coverage for every job in Washington. Ask the office for a certificate of insurance and we will email it before the crew arrives.
Which areas near Redmond do you cover?
All of King County, including Seattle, Bellevue, Kent and Renton. If you are outside that, we still probably cover you; check the Washington page for the full city list.
How do I set up boat refloating in Redmond?
Send a few photos through the estimate form or by text. We confirm what we can take and set up the free on-site estimate, and nothing is loaded until you say yes.
Do I need to be home for boat refloating in Redmond?
Only for the estimate, and even that can happen by phone or text with photos from the crew. Property managers and out-of-town owners do it this way every week.
What should I do before the crew gets to Redmond?
Very little. Decide what stays, point it out or tape it, and clear a path if it is easy. Pull personal items and any fuel cans off the boat. The crew does the rest.
Can you get it out of a tight spot in Redmond?
Usually. Boats boxed in by fences, docks, or other boats are winched or lifted rather than dragged. Send a photo of the access and we plan it before the day.
What if the weather is bad on the day?
Rain does not stop most jobs. Lightning, ice, and high wind do, especially for boat lifts and tow work. If we have to move your window we tell you as early as we can and reschedule at no charge.
I do not have the title for the boat. Can you still remove it in Washington?
In most cases, yes. Boat titling in Washington runs through the Washington Department of Licensing, with derelict vessels handled by the Department of Natural Resources, and there is a release or abandoned-vessel process for boats without paperwork. We tell you exactly which form to sign before pickup day.
Next step
Book boat refloating in Redmond
Send a few photos, tell us where in Redmond it sits, and how soon you need it gone. You will hear back within business hours with the first open two-hour window, and nothing moves until you say yes on site.
Internal links
More in Redmond and nearby
Free estimate
Boat refloating in Redmond?
Send a few details and we come back with the first open window. No obligation, and nothing moves until you say yes on site.
Monday to Saturday: 7:00 AM to 7:00 PM · Sunday: By appointment