Skip to content

Spokane County, Washington

Boat Refloating in Spokane

Grounded or swamped, back on the water without a wrecker.

Boat Refloating in Spokane, WA: grounded or swamped, back on the water without a wrecker. We cover Spokane County and the surrounding area with the right rig for the job and a free on-site estimate.

Around Spokane, boats end up in driveways, marina slips, and dry storage, and we have pulled them from all three.

  • Licensed & insured
  • Free on-site estimate
  • Same-week scheduling
  • Donate & recycle first
  • Boats, RVs & oversized loads
  • 20 states covered

Spokane, WA

Boat Refloating in Spokane, done the Spokane way

Spokane has every kind of job in it, from residential streets to commercial lots, and the process is the same for each: look, quote on site, wait for your yes, then work.

Marinas around Spokane have their own rules for removals. We coordinate with the dockmaster, bring marine-rated straps and the right trailer, and handle the the Washington Department of Licensing, with derelict vessels handled by the Department of Natural Resources paperwork.

Wet winters rot boats and campers fast, and spring is when Puget Sound marinas and storage lots push owners to deal with them. The calendar fills up in those stretches, so booking a week ahead gets you the window you want.

What we handle

Boat Refloating in Spokane: what we take

The short version: if it fits the description below, we take it. The long version is on the phone with whoever answers.

  1. 01

    Grounded boats after storms or low tide

    Boats pushed onto sandbars, shorelines, and seawalls by storms or low water.

  2. 02

    Swamped hulls at the dock

    Rain-filled or leaking hulls that are sitting low but not on the bottom.

  3. 03

    Listing boats with water intrusion

    Boats taking on water that need pumping and a tow before they go under.

  4. 04

    Tow to ramp, lift, or repair yard

    Delivery to wherever it needs to go next.

  5. 05

    Post-storm recovery for marinas

    Multiple-vessel refloating for marinas after a storm.

How it works

How boat refloating works in Spokane

Here is how a boat refloating job in Spokane runs from the first call to the last sweep.

  1. 01

    Assess

    Location, water depth, hull condition, and tide. We decide between pumps, lift bags, or a straight pull.

  2. 02

    Stabilize

    Lines set, water pumped, hull patched or bagged where needed.

  3. 03

    Refloat

    Controlled, on the right tide, without dragging the hull over the bottom.

  4. 04

    Deliver

    Towed to the ramp, the lift, or the yard, or removed entirely if that is the plan.

Washington rules

Titles, disposal, and Washington rules for boat refloating

Boat titling and registration in Washington is handled by the Washington Department of Licensing, with derelict vessels handled by the Department of Natural Resources. If you have the title, the removal is straightforward. If you do not, most counties recognize a release or abandoned-vessel process and we prepare the paperwork with you. Common waters in Washington include Puget Sound, Lake Washington and the Columbia River.

Fuel, oil, batteries, and refrigerant are handled properly on every job, which is the difference between a licensed removal company and an unlicensed one. Ask about it and we will show you where it goes.

Wet winters rot boats and campers fast, and spring is when Puget Sound marinas and storage lots push owners to deal with them.

Why now

Why Spokane stops putting it off

Most boat refloating calls from Spokane come after months of "we'll deal with it." Here is why the people who called last week were glad they did.

  • A boat taking on water today is a sunken boat recovery tomorrow.
  • Grounded hulls grind against the bottom with every wave.
  • Insurance claims go smoother when the boat is recovered quickly and documented.
  • Wet winters rot boats and campers fast, and spring is when Puget Sound marinas and storage lots push owners to deal with them.

From the truck

What boat refloating looks like on the day.

  • Flybridge boat with a bimini top tied to a dock on calm waterStabilized and floating
  • Covered boat raised on a dock liftLifted for transport
  • Swamped powerboat sitting low in the water under a boathouse roofSwamped at the dock

Straight talk

What boat refloating does not include

Two things every boat refloating customer should know before booking anyone, including us:

  • We refloat and move boats. We do not repair them.
  • Some hulls are too far gone to save, and we will tell you that on site rather than charge you for a refloat that does not hold.

Sound familiar?

Common boat refloating situations in Spokane

Every boat refloating call from Spokane starts with a story, and most of them sound like one of these.

  1. 01

    Aground after the storm

    The surge put the boat on the seawall or the neighbor's lawn, and it needs to go back in the water without cracking the hull.

  2. 02

    Sitting low at the dock

    Rain-filled and listing, but not under yet. A pump-out and a tow to the lift solves it today.

  3. 03

    Low water stranding

    The lake dropped and the boat is on the bottom at the dock. It needs to be floated and moved to deeper water.

  4. 04

    Post-storm marina cleanup

    Several boats pushed onto the shore and stacked against each other, each needing a controlled refloat.

Afterward

Where boat refloating material from Spokane ends up

"Where does it go?" is the right question to ask any removal company. This is our answer for Spokane.

  1. 01

    Fuel, oil, and batteries

    Fluids are drained and batteries removed before the hull moves, and both go to certified facilities.

  2. 02

    Motors and hardware

    Outboards, stern drives, winches, and stainless hardware are recovered for salvage or scrap.

  3. 03

    Hull breakdown

    Fiberglass hulls are cut down and disposed of at a facility that accepts them. Aluminum hulls are recycled as scrap.

  4. 04

    Trailers

    Working trailers are reused or resold; rusted-out frames go to scrap.

Before we arrive

How to prepare for boat refloating in Spokane

A few minutes before the crew arrives in Spokane saves an hour on site. None of it is heavy lifting.

  • Note the tide or water level trend so we can time the job.
  • Do not run the engine or try to pull it with a vehicle; hulls crack that way.
  • Tell us where it should go afterward: ramp, lift, or repair yard.

Equipment

What boat refloating in Spokane takes

The reason this job gets turned down by other companies is usually equipment. This is what we bring to Spokane.

  1. 01

    Marine-rated straps

    Hulls are strapped, not chained, and supported where the hull is meant to be supported.

  2. 02

    Trailers rated for the load

    Bunk, roller, and keel-capable trailers for boats of different hull types and sizes.

  3. 03

    Winches, pumps, and lift bags

    For boats with no trailer, boats in the water, and boats that are half under it.

Nearby

Boat refloating near Spokane

We also handle boat refloating in Spokane Valley, Liberty Lake, Cheney, Airway Heights and Deer Park and the rest of Spokane County. Same process.

Questions from Spokane

Boat Refloating in Spokane: your questions

Is refloating cheaper than removal?

Usually, when the hull is sound. We assess on site and tell you honestly which makes sense.

Do you repair boats?

No. We get it floating and moved. Your yard handles repairs.

Do you offer same-day boat refloating in Spokane?

Same-day boat refloating in Spokane depends on that day's schedule. We keep windows open for urgent calls, and next-day is almost always available.

Are you licensed and insured for boat refloating in Washington?

Yes. Lucky Hauling carries general liability and auto coverage for every job in Washington. Ask the office for a certificate of insurance and we will email it before the crew arrives.

Which areas near Spokane do you cover?

All of Spokane County, including Spokane Valley, Liberty Lake, Cheney and Airway Heights. If you are outside that, we still probably cover you; check the Washington page for the full city list.

How do I set up boat refloating in Spokane?

Send a few photos through the estimate form or by text. We confirm what we can take and set up the free on-site estimate, and nothing is loaded until you say yes.

Do I need to be home for boat refloating in Spokane?

Only for the estimate, and even that can happen by phone or text with photos from the crew. Property managers and out-of-town owners do it this way every week.

What should I do before the crew gets to Spokane?

Very little. Decide what stays, point it out or tape it, and clear a path if it is easy. Pull personal items and any fuel cans off the boat. The crew does the rest.

Can you get it out of a tight spot in Spokane?

Usually. Boats boxed in by fences, docks, or other boats are winched or lifted rather than dragged. Send a photo of the access and we plan it before the day.

What if the weather is bad on the day?

Rain does not stop most jobs. Lightning, ice, and high wind do, especially for boat lifts and tow work. If we have to move your window we tell you as early as we can and reschedule at no charge.

I do not have the title for the boat. Can you still remove it in Washington?

In most cases, yes. Boat titling in Washington runs through the Washington Department of Licensing, with derelict vessels handled by the Department of Natural Resources, and there is a release or abandoned-vessel process for boats without paperwork. We tell you exactly which form to sign before pickup day.

Next step

Book boat refloating in Spokane

Send a few photos, tell us where in Spokane it sits, and how soon you need it gone. You will hear back within business hours with the first open two-hour window, and nothing moves until you say yes on site.

Free estimate

Boat refloating in Spokane?

Send a few details and we come back with the first open window. No obligation, and nothing moves until you say yes on site.

Monday to Saturday: 7:00 AM to 7:00 PM · Sunday: By appointment

No obligation.
ServicesFree estimate